ตั้งค่า Accress Point D-link DIR-600
1. นำสาย LAN เสียบต่อระหว่าง Modem กับ ตัวของ Router ที่นำมา
2. เปิด Browser แล้วใส่ 192.168.1.1 เพื่อเข้าไปกำหนดค่าต่างๆของ Router
ให้สามารถแชร์ Wireless ได้ แล้วทำตามคู่มือ
DIR-600
IP: 192.168.0.1
Use=admin
Password ให้ว่างไว้
ถ้าไม่ได้ให้กดปุ่ม Reset ที่ตัว Router สัก 2-3 วินาที แล้วลองใหม่อีกครั้ง ถ้าเข้าได้แล้ว
ให้ทำตามคู่มือที่ให้มากับตัว Router
การตั้งค่า Password ในการเชื่อมต่อ Wireless ให้เข้าไปตั้งในเมนู Wireless เลือก Security ใช้เป็น WEP 64 Bit ใส่ค่าตัวเลข 0-9 หรือ ตัวอักษร A-F รวมทั้งตัวอักษรและตัวเลขไม่เกิน 10 ตัว
2. เปิด Browser แล้วใส่ 192.168.1.1 เพื่อเข้าไปกำหนดค่าต่างๆของ Router
ให้สามารถแชร์ Wireless ได้ แล้วทำตามคู่มือ
DIR-600
IP: 192.168.0.1
Use=admin
Password ให้ว่างไว้
ถ้าไม่ได้ให้กดปุ่ม Reset ที่ตัว Router สัก 2-3 วินาที แล้วลองใหม่อีกครั้ง ถ้าเข้าได้แล้ว
ให้ทำตามคู่มือที่ให้มากับตัว Router
การตั้งค่า Password ในการเชื่อมต่อ Wireless ให้เข้าไปตั้งในเมนู Wireless เลือก Security ใช้เป็น WEP 64 Bit ใส่ค่าตัวเลข 0-9 หรือ ตัวอักษร A-F รวมทั้งตัวอักษรและตัวเลขไม่เกิน 10 ตัว
Credit : http://panyaras.blogspot.com/
DIR-600
>>> DIR-600 Basic Installation/Configuration
This section will show you how to configure your new D-Link wireless router using the web-based configuration utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser
such as Internet Explorer and enter the IP address of the router (192.168.0.1).
Enter the user name (admin) and your password. Leave the password blank by default.
If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.
Setup Wizard
You may run the setup wizard from the opening Internet Setup window to quickly set up your router.
Click Internet Connection Setup Wizard, you will be directed to the first window of the wizard.
Click Next to continue.
Create a new password and then click Next to
Select your time zone and NTP-server from the drop-down menu and then click Next to continue.
Select the type of Internet connection you use and then click Next to continue.
If you selected Dynamic, you may need to enter the MAC address of the
computer that was last connected directly to your modem. If you are currently
using that computer, click Clone Your PC’s MAC Address and then click Next to continue.
The Host Name is optional but may be required by some ISPs. The default
host name is the device name of the Router and may be changed.
If you selected PPPoE, enter your PPPoE username and password. Click
Next to continue.
Select Static if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses.
Note: Make sure to remove your PPPoE software from your computer.
The software is no longer needed and will not work through a router.
If you selected PPTP, enter your PPTP username and password. Click
Next to continue.
If you selected L2TP, enter your L2TP username and password. Click Next
to continue.
If you selected PPPoE, enter your PPPoE username and password. Click
Next to continue.
Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.
***Note: Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.
If you selected PPTP, enter your PPTP username and password. Click
Next to continue.
If you selected L2TP, enter your L2TP username and password. Click Next
to continue.
If you selected Static, enter your network settings supplied by your Internet
provider. Click Next to continue.
Click Connect to save your settings.
Please allow 1-2 minutes for rebooting. When the router has finished rebooting, the opening window will be displayed
This section will show you how to configure your new D-Link wireless router using the web-based configuration utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser
such as Internet Explorer and enter the IP address of the router (192.168.0.1).
Enter the user name (admin) and your password. Leave the password blank by default.
If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.
Setup Wizard
You may run the setup wizard from the opening Internet Setup window to quickly set up your router.
Click Internet Connection Setup Wizard, you will be directed to the first window of the wizard.
Click Next to continue.
Create a new password and then click Next to
Select your time zone and NTP-server from the drop-down menu and then click Next to continue.
Select the type of Internet connection you use and then click Next to continue.
If you selected Dynamic, you may need to enter the MAC address of the
computer that was last connected directly to your modem. If you are currently
using that computer, click Clone Your PC’s MAC Address and then click Next to continue.
The Host Name is optional but may be required by some ISPs. The default
host name is the device name of the Router and may be changed.
If you selected PPPoE, enter your PPPoE username and password. Click
Next to continue.
Select Static if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses.
Note: Make sure to remove your PPPoE software from your computer.
The software is no longer needed and will not work through a router.
If you selected PPTP, enter your PPTP username and password. Click
Next to continue.
If you selected L2TP, enter your L2TP username and password. Click Next
to continue.
If you selected PPPoE, enter your PPPoE username and password. Click
Next to continue.
Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.
***Note: Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.
If you selected PPTP, enter your PPTP username and password. Click
Next to continue.
If you selected L2TP, enter your L2TP username and password. Click Next
to continue.
If you selected Static, enter your network settings supplied by your Internet
provider. Click Next to continue.
Click Connect to save your settings.
Please allow 1-2 minutes for rebooting. When the router has finished rebooting, the opening window will be displayed
ความรู้เพิ่มเติม มีให้อ่านเยอะ ลองดู
วิธีการทำโหมดไร้สาย WDS บนอุปกรณ์ D-Link DIR-600 บน DD-WRT
สารพัดการ Set Router
ไม่มีความคิดเห็น:
แสดงความคิดเห็น